Chalmit Protecta III Fluorecent 2x18W PRGE/218/BI/M25

Chalmit Protecta III Fluorecent 2x18W

PRGE/218/BI/M25

Varenr: PRGE/218/BI-2
Alt. varenr: 3348946

Protecta III (PRGE - Standard)

by Chalmit Lighting

The Protecta III is a proven and reliable T8 fluorescent luminaire. The Protecta’s rugged, corrosion resistant construction (IP66/IP67) combined with an advanced high frequency ballast ensure minimum product maintenance is required. When access is required the Protecta III features an easy access clamp bar and automatic lamp de-energisation.

  • Simple rugged construction.
  • Advanced control gear gives 50/60Hz operation, high power correction factor and regulated lamp output that is 20% greater at -20°C than competitors.
  • Resistant to voltage fluctuations.
  • dc operation.
  • Quick release mains terminals.
  • DTS-01 deluge tested.
  • Vibration tested to comply with Lloyds/DNV.
  • End of life (EOL) protection to IEC 60079-7.

The Protecta III hazardous area Ex e fluorescent luminaire is designed for use in Zone 1 areas. Click the ‘request a quote’ button to speak to one of our Specialists about how the Protecta III range could work for you.

 

 

Type of protection

Ex e mb q (Increased safety Encapsulation Powder filling)

ATEX Classification

Group II Category 2 GD

Area Classification

Zone 1 and 21 areas to EN 60079-10-1 and EN 60079-10-2 with installation to EN 60079-14

Certificate

EC Type Examination Certificate Baseefa04ATEX0220

Coding

EX II 2 GD Ex e mb q IIC T4 Tamb 55°C

Enclosure

GRP body with polycarbonate cover and brass suspension points

Reflector/Geartray

White polyester painted zinc coated steel

Entry

4 x M20 cable entries, 2 at each end

Termination

Quick release mains terminals - 4 core 4mm² max. conductor with looping and 16A rating through wiring. (6mm² terminations available - /SC option)

Installation

Two M8 tapped brass inserts located on rear of body

Control Gear

High Frequency

Relamping

Quick release diffuser clamp and hinged cover

Lampholder

G13 (Bi-pin)

Burning Position

Universal

Ingress Protection

IP66/67 to EN 60529

Electrical Supply

220V - 254V 50/60Hz




Std. Cat No.

Wattage

Lamp

TClass

T°C (Dust)

Ambient °C

Weight

PRGE/218/BI

2x18W

T8

T4

85

-20 to +55

7.4kg

PRGE/236/BI

2x36W

T8

T4

85

-20 to +55

10.9kg

PRGE/218/MO

2x18W

T8

T4

85

-20 to +55

7.4kg

PRGE/236/MO

2x36W

T8

T4

85

-20 to +55

10.9kg

MO – Mono-pin (fa6 Cap) Lamps. Mono-pin Coding: Ex d e q.

 




Options – Suffix to catalogue No.

/120

Specific voltage (110/130)

/M25

M25 cable entries

/SC

Screwed connection terminal block (up to 6mm² conductors)

/SB

Stainless steel mounting bush

/3P

3 phase termination facility (Not available if looping required)

/LBE

Looping both ends

/EL

Extra live termination facility (to match emergency circuit)

/SE

Spigot entry