Meinberg LANTIME M100/PZF/DC, DIN-rail Inkl. DCF77 antenne og 10m RG58 kabel Meinberg LANTIME M100/PZF/DC, DIN-rail Inkl. DCF77 antenne og 10m RG58 kabel Meinberg LANTIME M100/PZF/DC, DIN-rail Inkl. DCF77 antenne og 10m RG58 kabel Meinberg LANTIME M100/PZF/DC, DIN-rail Inkl. DCF77 antenne og 10m RG58 kabel Meinberg LANTIME M100/PZF/DC, DIN-rail Inkl. DCF77 antenne og 10m RG58 kabel

Meinberg LANTIME M100/PZF/DC, DIN-rail

Inkl. DCF77 antenne og 10m RG58 kabel

Varunummer: M100/PZF/DC
Meinberg LANTIME M100/PZF/DC for 24 VDC
 
Key Features
- Synchronization of NTP and SNTP compatible clients
- Web based status and configuration interface
- USB Port for installing firmware updates and restore of configuration files
- DCF77 outfoor antenna AW02 and 20m RG58 coax cable included
 
LANTIME M100 Time Servers can be installed to provide accurate time to small and medium sized computer networks. This entry level time server synchronizes all systems either NTP- or SNTP-compatible utilizing a built-in Meinberg GPS radio clock as its primary reference time source. A stable and precise oscillator is capable of bridging interferences or a temporary loss of reception. Its compact form factor offers an ideal solution to network time synchronization needs in industrial and power generation/distribution networks.
 
Characteristics
Type of receiver
DCF77 longwave sent from Frankfurt in Germany
 
Type of antenna:
Remote powered DCF77 antenna/converter unit for longwave signal. Up to 300m distance to antenna with RG58 and up to 700m distance with RG213 cable.
 
Control elements:
Serial Terminal Interface (RS232) for initial configuration, Status LEDs
 
Status info:
Four bicolor LEDs showing status of:
- reference time
- time service
- network
- alarm
 
Network Interface:
RJ-45 Network Connection 10/100 MBit
 
Power supply: 
24 VDC input
Power consumption: 20W
 
Universal Serial Bus (USB) Ports: 1x USB Port in front panel:
- install firmware upgrades
- backup and restore configuration files
- copy security keys
- lock/unlock front keys
 
Single-Board-Computer: i386 compatible 500Mhz CPU, 128 MB RAM
Operating System of the SBC: Linux with nano kernel (incl. PPSkit)
Network protocols OSI Layer 4 (transport layer): TCP, UDP
Network protocols OSI Layer 7 (application layer): TELNET, FTP, SSH (incl. SFTP, SCP), HTTP, HTTPS, SYSLOG, SNMP
Internet Protocol (IP): IP v4, IP v6
Network Autoconfiguration Support: IPv4: Dynamic Host Configuration Protocol - DHCP (RFC 2131)
IPv6: Autoconfiguration Networking - AUTOCONF
 
Network Time Protocol (NTP): NTP v2 (RFC 1119), NTP v3 (RFC 1305), NTP v4 (no RFC)
SNTP v3 (RFC 1769), SNTP v4 (RFC 2030)
MD5 Authentication and Autokey Key Management
Time Protocol (TIME): Time Protocol (RFC 868)
Daytime Protocol (DAYTIME): Daytime Protocol (RFC 867)
IEC 61850: Synchronization of IEC 61850 compliant devices by using SNTP
Hypertext Transfer Protocol (HTTP): HTTP/HTTPS (RC 2616)
Secure Shell (SSH): SSH v1.3, SSH v1.5, SSH v2 (OpenSSH)
Telnet: Telnet (RFC 854-RFC 861)
 
Form Factor:
DIN Rail mountable Aluminium Profile chassis (125,5mm x 105mm x 189mm / W x H x D)
 
Ambient temperature: 0 ... 50°C / 32 ... 122°F
Humidity: Max. 85%
 
Scope of supply: Included in delivery is the DCF77 outdoor antenna AW02, 10m coax cable (RG58) and product documentation.
 
Warranty: Three-Year Warranty
 
Firmware Updates: Firmware is field-upgradeable, updates can be installed directly at the unit or via a remote network connection.
Software updates are provided free of charge, for the lifetime of your Meinberg product.
 
Note: Picture shows M100/GPS. The M100/PZF will look exactly the same but with different text for the antenna connector.