Hawke 123 C-M32 Brass Industrial (19.5mm-26.5mm)

General

Application
  • Outdoor or indoor use
  • For use with non-armoured elastomer and plastic insulated cables
  • May be used on cables incorporating inner and outer cable sheath at two independent sealing points.

Certifications and Compliance

Certified Listed
  • EN 62444
  • BS 6121: Part 1. Type A2
Industry Standard(s)
  • EN 62444
  • BS 6121: Part 1. Type A2

CABLE GLAND SELECTION TABLE
Size
Ref.
Entry Thread
Size
Cable Acceptance Details ‘G’
Compressed
Length
Hexagon
Dimensions
Metric NPT* Outer Sheat'B' Across
Flats
Across
Corners
Standard Option Standard Seal Alternative Seal (S)
Min. Max. Min. Max.
Os M20² ½" - 3.0 8.0 - - 40.0 24.0 26.5
O M20² ½" - 7.5 11.9 - - 40.0 24.0 26.5
A M20 ¾" ½" 11.0 14.3 8.5 13.4 40.4 30.0 32.5
B M25 1" ¾" 13.0 20.2 9.5 15.4 44.3 36.0 39.5
C M32 1¼" 1" 19.0 26.5 15.5 21.2 47.2 46.0 50.5
C2 M40 1½" 1¼" 25.0 32.5 22.0 28.0 49.5 55.0 60.6
D M50 2" 1½" 31.5 44.4/42.3¹ 27.5 34.8 72.5 65.0 70.8
E M63 2½" 2" 42.5 56.3/54.3¹ 39.0 46.5 64.8 80.0 88.0
F M75 3" 2½" 54.5 68.2/65.3¹ 48.5 58.3 68.0 95.0 104.0
G M80 3½" - 67.0 73.0 - - 68.0 106.4 115.0
H M190 3½" - 67.0 77.6 - - 68.0 115.0 130.0
J M100 4" - 75.0 91.6 - - 68.0 127.0 142.0
All dimensions in millimetres (except * where dimensions are in inches). Os - F size metric entry threads are 1.5mm pitch as standard, 15mm length of thread. For G size glands and above, a 2mm pitch is supplied as standard, 20mm length of thread (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering
¹ Smaller value is applicable when selecting reduced NPT entry option.
² Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable outer sheath diameter is 10.9mm