6B Series Mixed Signal Oscilloscope

Troubleshoot and validate high-speed designs with bandwidth that starts at 1 GHz and goes up to 10 GHz . Get accurate measurements with low noise and sample rate up to 50 GS/s . See more of your design with 6- and 8-channel models.
 
Input channels

• 4, 6, or 8 FlexChannel® inputs
  Each FlexChannel provides:
  - One analog signal that can be displayed as a waveform view, a spectral view, or both simultaneously
  - Eight digital logic inputs with TLP058 logic probe
   

Bandwidth (all analog channels)

• 1 GHz, 2.5 GHz, 4 GHz, 6 GHz, 8 GHz, 10 GHz (upgradable)

Sample rate (all analog / digital channels)

• Real-time: 50 GS/s (2 channels), 25 GS/s (4 channels), 12.5 GS/s (> 4 channels)
• Interpolated: 2.5 TS/s

• 62.5 Mpoints standard
• 125, 250, 500 Mpoints, or 1 Gpoints (optional)

Waveform capture rate

• >500,000 waveforms/s 

Vertical resolution

• 12-bit ADC
• Up to 16-bits in High Res mode

Standard trigger types

• Edge, Pulse Width, Runt, Timeout, Window, Logic, Setup & Hold, Rise/Fall Time, Parallel Bus, Sequence, Visual Trigger, Video (optional), RF vs. Time (optional)
  Auxiliary Trigger =5 VRMS, 50O, 400 MHz (Edge Trigger only)

Standard analysis

• Cursors: Waveform, V Bars, H Bars, V&H Bars
• Measurements: 36
• Spectrum View: Frequency-domain analysis with independent controls for frequency and time domains
• FastFrameTM: Segmented memory acquisition mode with maximum trigger rate >5,000,000 waveforms per second
• Plots: Time Trend, Histogram, Spectrum and Phase Noise
• Math: Basic waveform arithmetic, FFT, and advanced equation editor
• Search: Search on any trigger criteria
• Jitter: TIE and Phase Noise

Optional analysis

• Advanced Jitter and Eye Diagram Analysis
• User-defined filtering
• Advanced Spectrum View
• RF vs. Time traces (magnitude, frequency, phase)
• Digital Power Management
• Mask/Limit Testing
• Inverters, Motors, and Drives
• LVDS Debug and Analysis
• PAM3 Analysis
• Advanced Power Measurements and Analysis
• Advanced Vector Signal Analysis (SignalVu-PC)

Optional serial bus trigger, decode, and analysis

• I2C, SPI, eSPI, I3C, RS-232/422/485/UART, SPMI, SMBus, CAN, CAN FD, LIN, FlexRay, SENT, PSI5, CXPI, Automotive Ethernet,MIPI C-PHY,MIPI D-PHY, USB 2.0, eUSB2, Ethernet, EtherCAT, Audio, MIL-STD-1553, ARINC`429, Spacewire, 8B/10B,NRZ, Manchester, SVID, 1-Wire, MDIO

Optional serial compliance test

• USB Host (7 ports), USB 3.0 Device (1 port), LAN (10/100/1000 Base-T Ethernet), Display Port, DVI-I, VGA
   

e*Scope®

• Remotely view and control the oscilloscope over a network connection through a standard web browser
   
  

Warranty

• 1 year standard