Clamp Meter for earth loop measurement

User-friendly and accurate, the DGC-1000A helps you work safetly without test leads or auxiliary electrodes. The on-board memory and data logging features improve efficiency.

In the case of earthing systems with earths connected to each other that create a closed loop (e.g. the lightning protection system on a house), the earth resistance of every earth loop can be quickly and safely determined by means of a clamp meter for earth loop measurement (DGC-1000A). The DGC-1000A clamp meter is a clamp with two current clamps in practical terms, which are installed within a housing. This clamp combines the two current clamps needed to perform the stakeless ground loop test in one compact and easy to use instrument. A measurement current is induced in the earth loop with a current clamp, whilst the current running through the earth is measured with a second clamp in order to derive the resistance of the earth loop for the relevant earth.

Functions

• Earth loop measurement range: 0.025–1500 O
• Stray current measurement range 0.2...1000 mA
• Current measurement range: 0.2–0 A

Product information

• Measurement memory for 116 readings
• Recording interval 1...255 s
• Limit adjustment with alarm function
• Data hold function
• Jaw opening 23 mm
• Calibration loop included

Product highlights

• Earth measurement in closed earthing systems without setting of earth stakes
• TRMS current measurement