Auteldac 5 Analogue, 0 button


Varenr: Auteldac-5-0
Handset cord
Std.1m curly cord
Std.1m curly cord
Steel cord
Steel cord
BeskrivelseTeknisk infoSupport

Auteldac 5

ATEX & IECEx Approved Hazardous Area Telephone

  • Ex II 2 GD & Ex II 2 G ATEX Certified telephone for Gas and Dust
  • Zone 1 & 2, Zone 21 & 22 Compliant models
  • CE (R&TTE Directive 1999/5/EC and ATEX Product Directive 94/9/EC)
  • IECEx certified
  • InMetro Approved for Gas
  • Fully compliant with TBR21 (ES203 021) / TBR38
  • Full keypad with 3 programmable memory buttons, or CB variant
  • Optional removable headset*
  • 90dB sounder (adjustable)
  • Beacon / external sounder actuator
  • Robust and weather resistant: IP66
  • Extended cord length available
  • Auteldac 5 has 2 M20 cable entry gland positions.


General Specifications

Enclosure: Carbon loaded glass-filled polyester (colour: black)

Surface resistance: <109 O

Handset: Conductively coated polycarbonate handset with coiled cord or stainless steel spiral cord. Noise cancelling options. Extended cord lengths available.

Keypad: Weathersealed tactile digital keypad

Hookswitch: Electronic with no mechanical moving parts

Weather Ingress protection: Up to IP66

Ringing: Shrill warble tone >90 dBA @ 1 metre typical. Internal volume control.

Power Supply: Drawn from telephone line

Integral Ring Detector: Contact closure following the ringing cadence, rated at 230Vac, 3A r.m.s.

Isolated hookswitch sensor: Additional contact rated at 230Vac, 150mA r.m.s.

Parallel Terminal Block: Duplicated line terminals allows connection to a parallel device without an additional junction box.

Time Out: Enforces a fixed call maximum time limit to 7 minutes from lifting of the handset. User selectable ON or OFF

Dialling system: LD or DTMF (switchable)

Recall Button: Internally switchable from Earth Loop Recall (600ms pulse) and Timed Break Recall 100ms, 250ms or 600ms.

Certified Operating Temperature: -20° C up to +60° C

Relative Humidity: Up to 95% (non-condensing)

Weight: approx. 3.2 kg

Headset: The headset cord is approximately 820mm long and can extend to approximately 2m. The headset extension lead will allow the operator to use the headset over 6 metres away from the telephone.


Order Information:

Auteldac 5CB blk 320mm n/c, curly cord 212-02-5020-400

Auteldac 5, 18btn blk 320mm n/c, curly cord 212-02-5028-400

Auteldac 5, CB+ headset socket*, curly cord 212-02-5020-410

Auteldac 5, 18btn blk 320mm n/c + headset socket*, curly cord 212-02-5028-410

Auteldac 5 Stainless Steel Cord Auteldac 5, CB blk 745mm n/c, steel cord 212-02-5020-500

Auteldac 5, 18btn blk 745mm n/c, steel cord 212-02-5028-500

Auteldac 5, CB + headset socket*, steel cord 212-02-5020-510

Auteldac 5, 18btn blk 745mm n/c + headset socket*, steel cord 212-02-5028-510

Headset & Plug for Auteldac 5

*Headset & Plug 100-02-0598-001

Extension cord for Headset 610-35-2036-001



Teknisk info


Produsent Gai-Tronics

Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.