LANTIME M300/TCR/RPS
NTP time server for 19" installation
with management CPU and internal IRIG Time Code receiver
with TCXO Timebase *):
2 x LAN interface 10/100 MBit, RJ45 connector
1 x Terminal RS232 interface, 9pin D-Sub male connector
for initial setup and configuration
1 x USB Service interface
1 x LC-Display (2 x 40 characters) and 8 push buttons
----------------------------------------------------------------------------------------------
Reference Inputs:
1 x Time Code modulated input, impedance 600 ohm,
via isolated female BNC connector
1 x Time Code unmodulated, opto coupler input
via isolated female BNC connector
Selectable Time Code Inputs, modulated / unmodulated (DCLS):
- B122, B123, B126, B127; B002, B003, B006, B007
- A132, A133, A136, A137; A002, A003, A006, A007
- G142, G146
- IEEE1344, C37.118 AFNOR NFS 87-500
----------------------------------------------------------------------------------------------
Signal Outputs:
2 x RS232 interface, independent, 9pin D-Sub female connector,
with multi data formats timestrings.
1 x PPS, TTL into 50 ohm, pulse duration 200 msec,
active high, female BNC connector
1 x Standard Frequency 10 MHz, TTL into 50 ohm, female BNC connector
1 x Alarm Relay Output, change-over contact, 3pin DFK connector
----------------------------------------------------------------------------------------------
Technical specifications:
Power supply: 100-240 V AC (50-60 Hz)
Power consumption: max. 30 W
19" metal chassis, 1 U/84 HP
(483 mm wide x 43 mm high x 285 mm deep)
----------------------------------------------------------------------------------------------