Meinberg LANTIME M300/GPS/TC-1-1
Network Time Server (NTP) with integrated receiver/radio clock and 2x IRIG-B outputs.
NTP time server for 19" installation with management CPU and internal time reference:
GPS satellite receiver/radio clock with TCXO-HQ Timebase.
- Meinberg GPS antenna input, BNC female connector, isolated
2 x LAN interface 10/100 MBit, RJ45 connector
1 x Terminal RS232 interface, 9pin D-Sub male connector
for initial setup and configuration
1 x USB Service interface
1 x LC-Display (2 x 40 characters) and 8 push buttons
----------------------------------------------------------------------------------------------
Signal Outputs:
2 x RS232 interface, independent, 9pin D-Sub female connector,
with multi data formats timestrings.
1 x PPS, TTL into 50 ohm, pulse duration 200 msec,
active high, female BNC connector
1 x Standard Frequency 10 MHz, TTL into 50 ohm, female BNC connector
1 x Time Code AM, amplitude modulated sinewave output (e.g. IRIG-B12x) ,
3Vpp into 50 ohm, via female BNC connector
1 x Time Code DCLS, Pulse-width modulated output (e.g. IRIG-B00x),
TTL active high, via female BNC connector
(AM and DCLS Time Code signals are generated in parallel )
additionally Time Codes available: IEEE1344 und AFNOR NFS 87-500.
1 x Alarm Relay Output, change-over contact, 3pin DFK connector
----------------------------------------------------------------------------------------------
Technical specifications:
Power supply: 100-240V AC (50/60Hz)
Power consumption: max. 30W
19" metal chassis, 1U/84HP (442mm wide x 43mm high x 288mm deep)
CE compliant
----------------------------------------------------------------------------------------------
Scope of supply:
The system will be delivered inclusive of GPS/Converter
outdoor antenna, mounting kit and 20m coax-cable (RG58).