LANTIME M300/GPS-HQ/EC-0-2

http://www.meinberg.de/english/products/lantime-m300-gps.htm

NTP time server for 19" installation
with management CPU and internal time reference:
GPS satellite receiver/radio clock with OCXO-HQ Timebase *)
- Meinberg GPS antenna input,  BNC female connector, isolated
2 x LAN interface 10/100 MBit, RJ45 connector
1 x Terminal RS232 interface, 9pin D-Sub male connector
      for initial setup and configuration
1 x USB Service interface
1 x LC-Display (2 x 40 characters) and 8 push buttons
----------------------------------------------------------------------------------------------
Signal Outputs:
2 x RS232 interface, independent, 9pin D-Sub female connector,
      with multi data formats timestrings.
1 x PPS, TTL into 50 ohm, pulse duration 200 msec,
      active high, female BNC connector
1 x Standard Frequency 10 MHz, TTL into 50 ohm, female BNC connector
1 x Alarm Relay Output, change-over contact, 3pin DFK connector

2 x 2048 kHz (E1-mode), G.703, 75 ohm (unbalanced), female BNC connectors
----------------------------------------------------------------------------------------------
Technical specifications:
Power supply: 100-240V AC (50/60Hz)
Power consumption: max. 30W
19" metal chassis, 1U/84HP (442mm wide x 43mm high x 288mm deep)
CE compliant
----------------------------------------------------------------------------------------------
Scope of supply:
The system will be delivered inclusive of GPS/Converter
outdoor antenna, mounting kit and 20m  coax-cable (RG58).