LANTIME M300/GPS/TC-1-9

http://www.meinberg.de/english/products/lantime-m300-gps.htm
NTP time server for 19" installation
with management CPU and internal time reference:
GPS satellite receiver/radio clock with TCXO-HQ Timebase
- Meinberg GPS antenna input,  BNC female connector, isolated

2 x LAN interface 10/100 MBit, RJ45 connector
1 x Terminal RS232 interface, 9pin D-Sub male connector
      for initial setup and configuration
1 x USB Service interface
1 x LC-Display (2 x 40 characters) and 8 push buttons
----------------------------------------------------------------------------------------------
Signal Outputs:
2 x RS232 interface, independent, 9pin D-Sub female connector,
      with multi data formats timestrings.
1 x PPS, TTL into 50 ohm, pulse duration 200 msec,
      active high, female BNC connector
1 x Standard Frequency 10 MHz, TTL into 50 ohm, female BNC connector
1 x Alarm Relay Output, change-over contact, 3pin DFK connector

1 x Time Code AM, amplitude modulated sinewave output (e.g. IRIG-B12x) ,
      3Vpp into 50 ohm,  via female BNC connector
9 x Time Code DCLS, Pulse-width modulated output (e.g. IRIG-B00x),
      TTL active high, via female BNC connector
      (AM and DCLS Time Code signals are generated in parallel )
      additionally Time Codes available: IEEE1344 und AFNOR NFS 87-500.
----------------------------------------------------------------------------------------------
Technical specifications:
Betriebsspannung: 100-240 V AC (50-60 Hz)
Power consumption: max. 30 W
19" metal chassis, 1 U/84 HP
(483 mm wide x 43 mm high x 285 mm deep)
----------------------------------------------------------------------------------------------
Scope of supply:
The system will be delivered inclusive of GPS/Converter
outdoor antenna, mounting kit and 20 m  coax-cable (RG58).