LANTIME M300/GNS/2LNE/RPS

- (for GPS, Glonass, Galileo und Beidou-Synchronisation)
NTP time server for 19" installation
with management CPU and internal time reference:
Multi-GNSS satellite receiver/radio clock with TCXOTimebase *)
- GPS/GNSS antenna input,  SMA female connector

6 x LAN interface 10/100 MBit, RJ45 connector
1 x Terminal RS232 interface, 9pin D-Sub male connector
      for initial setup and configuration
1 x USB Service interface
1 x LC-Display (2 x 40 characters) and 8 push buttons
----------------------------------------------------------------------------------------------
Signal Outputs:
2 x RS232 interface, independent, 9pin D-Sub female connector,
      with multi data formats timestrings.
1 x PPS, TTL into 50 ohm, pulse duration 200 msec,
      active high, female BNC connector
1 x Standard Frequency 10 MHz, TTL into 50 ohm, female BNC connector
1 x Alarm Relay Output, change-over contact, 3pin DFK connector
----------------------------------------------------------------------------------------------
Technical specifications:
Power supply (redundant): 100-240 V DC / 100-240 V AC (50-60 Hz)
Power consumption: max. 30 W
19" metal chassis, 1 U/84 HP
(483 mm wide x 43 mm high x 285 mm deep)
----------------------------------------------------------------------------------------------
Scope of Supply:
The system will be delivered inclusive of L1-GPS/GNSS
outdoor antenna, mounting kit and 20 m antenna cable (Belden H155).