Hawke 121 OS-M20 Nickel Plated

Industrial (3,0mm-8,0mm)

Varenr: 121-OSM20NP
BeskrivelseTeknisk infoSupport
Beskrivelse

 

Application

Outdoor or indoor use.
For use with non-armoured elastomer and plastic insulated cables.

Features

Provides a cable retention seal onto the cables outer sheath.

Materials & Finishes

The 121 cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard.

Technical Data

  1. Construction and Test Standards:
    EN 62444. BS 6121 Part 1. Type A2.
  2. Ingress Protection:
    IP66, IP67 and 
    IP 68  (30 metres for 7 days) to IEC/EN 60529.
  3. Operating Temperature Range:
    -60°C to +100°C
  4. Deluge Protection to:
    DTS01
  5. Assembly Instruction Sheet:
    AI 392.

 

CABLE GLAND SELECTION TABLE
Size
Ref.
Entry Thread
Size
Cable Acceptance Details ‘G’
Compressed
Length
Hexagon
Dimensions
Metric NPT* Outer Sheat'B' Across
Flats
Across
Corners
Standard Option Standard Seal Alternative Seal (S)
Min. Max. Min. Max.
2K M16 - - 3.0 8.0 - - 23.5 19.0 21.2
Os M20² ½" - 3.0 8.0 - - 23.8 24.0 26.5
O M20² ½" - 7.5 11.9 - - 23.8 24.0 26.5
A M20 ¾" ½" 11.0 14.3 8.5 13.4 24.8 30.0 32.5
B M25 1" ¾" 13.0 20.2 9.5 15.4 25.8 36.0 39.5
C M32 1¼" 1" 19.0 26.5 15.5 21.2 28.2 46.0 50.5
C2 M40 1½" 1¼" 25.0 32.5 22.0 28.0 29.5 55.0 60.6
D M50 2" 1½" 31.5 44.4/42.3¹ 27.5 34.8 40.4 65.0 70.8
E M63 2½" 2" 42.5 56.3/54.3¹ 39.0 46.5 38.2 80.0 88.0
F M75 3" 2½" 54.5 68.2/65.3¹ 48.5 58.3 40.5 95.0 104.0
G M80 3½" - 67.0 73.0 - - 41.0 106.4 115.0
H M190 3½" - 67.0 77.6 - - 41.0 115.0 130.0
J M100 4" - 75.0 91.6 - - 41.0 127.0 142.0
All dimensions in millimetres (except * where dimensions are in inches). 2K - F size metric entry threads are 1.5mm pitch as standard, 15mm length of thread. For G size glands and above, a 2mm pitch is supplied as standard, 20mm length of thread (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering
¹ Smaller value is applicable when selecting reduced NPT entry option.
² Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable outer sheath diameter is 10.9mm

Teknisk info

Produktinformasjon

Produsent Hawke International


Support
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.