Hawke 321 (A) 1/2 NPT Brass

Exe (10,0mm-14,3mm)

Varenr: 321-A1/2NBR
321 Size
2K-M16 (3,2 - 8,0)
2K-M16 (3,2 - 8,0)
AS-M20 (8,5-13,5)
AS-M20 (8,5-13,5)
OS-1/2 NPT (3,2 - 8,0)
OS-1/2 NPT (3,2 - 8,0)
O-1/2 NPT (6,5-11,9)
O-1/2 NPT (6,5-11,9)
A-1/2 NPT (10,0-14,3)
A-1/2 NPT (10,0-14,3)
OS-M20 (3,2 - 8,0)
OS-M20 (3,2 - 8,0)
BS-M25 (9,5-15,4)
BS-M25 (9,5-15,4)
O-M20 (6,5 - 11,9)
O-M20 (6,5 - 11,9)
CS-M32 (15,5-21,2)
CS-M32 (15,5-21,2)
A-M20 (10,0 - 14,3)
A-M20 (10,0 - 14,3)
B-M25 (13,0 - 20,2)
B-M25 (13,0 - 20,2)
C-M32 (19,5 - 26,5)
C-M32 (19,5 - 26,5)
ES-M63 (39,0 - 46,5)
ES-M63 (39,0 - 46,5)
C2-M40 (25,0 - 32,5)
C2-M40 (25,0 - 32,5)
C2S-M40 (22,0-28,0)
C2S-M40 (22,0-28,0)
D-M50 (31,5 - 44,4)
D-M50 (31,5 - 44,4)
DS-M50 (27,5 - 34,8)
DS-M50 (27,5 - 34,8)
E-M63 (42,5 - 56,3)
E-M63 (42,5 - 56,3)
F-M75 (54,5 - 68,2)
F-M75 (54,5 - 68,2)
FS-M75 (49,5 - 58,3)
FS-M75 (49,5 - 58,3)
A -3/4" NPT (10,0 - 14,3)
A -3/4" NPT (10,0 - 14,3)
B-3/4" NPT (13,0 - 20,2)
B-3/4" NPT (13,0 - 20,2)
BeskrivelseTeknisk infoTilbehørSupport
Beskrivelse

Technical Data

ATEX/IECEx
Increased Safety Exe IIC Gb and Dust Extb IIIC Db Ex II 2 GD

Certificate No's
Baseefa06ATEX0059X and IECEx BAS 06.0016X.

Suitable for use in:
Zone 1, Zone 2, Zone 21, Zone 22.

Construction and Test Standards:
IEC/EN 60079-0, IEC/EN 60079-7 and IEC/EN 60079-31.

Ingress Protection:
IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.

Deluge Protection to:
DTS01

Operating Temperature Range:
-60°C to +100°C

Assembly Instruction Sheet:
AI 451.

cCSAus
Increased Safety AExe IIC Gb and Dust AExtD Zone 21.
Explosion-proof Class 1 Division 2, Class II Division 2 Groups EFG, Class III.

Certificate No's
CSA1015065 for Marine Shipboard Cable.

Construction and Test Standards:
UL 60079-0, UL 60079-7, ISA 60079-31.
CSA 22.2 No: 60079-0, CSA 22.2 No: 60079-7, CSA 22.2 No: 60079-31, UL 2225.

 

CABLE GLAND SELECTION TABLE
Size
Ref.
Entry Thread
Size
‘H’
Thread
Length
Cable Acceptance Details ‘G’
Compressed
Length
Hexagon
Dimensions
‘B’ Outer Sheath
Metric NPT
*
Standard Seal Alternative
(S) Seal
Across
Flats
Across
Corners
Standard Option Min. Max. Min. Max.
2K M16 - - 15.0 3.2 8.0 - - 23.5 19.0 21.2
Os M20 ‡ ½" - 15.0 3.2 8.0 - - 23.8 24.0 26.5
O M20 ‡ ½" - 15.0 6.5 11.9 - - 23.8 24.0 26.5
A M20 ¾" ½" 15.0 10.0 14.3 9.0 13.4 24.8 30.0 32.5
B M25 1" ¾" 15.0 13.0 20.2 9.5 15.4 25.8 36.0 39.5
C M32 1¼" 1" 15.0 19.5 26.5 15.5 21.2 28.2 46.0 50.5
C2 M40 1½" 1¼" 15.0 25.0 32.5 22.0 28.0 29.5 55.0 60.6
D M50 2" 1½" 15.0 31.5 44.4/42.3 † 27.5 34.8 40.4 65.0 70.8
E M63 2½" 2" 15.0 42.5 56.3/54.3 † 39.0 46.5 38.2 80.0 88.0
F M75 3" 2½" 15.0 54.5 68.2/65.3 † 48.5 58.3 40.5 95.0 104.0
G M80 3½" - 20.0 67.0 73.0 - - 41.0 106.4 115.0
H M90 3½" - 20.0 67.0 77.6 - - 41.0 115.0 130.0
J M100 4" - 20.0 75.0 91.6 - - 41.0 127.0 142.0
All dimensions in millimetres (except * where dimensions are in inches).
2K - F size metric entry threads are 1.5mm pitch as standard, 15mm length of thread. For G size Cable Glands and above, a 2mm pitch is supplied as standard 20mm length of thread (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering.
†Smaller value is applicable when selecting the reduced NPT entry option.
‡ Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable outer sheath diameter is 10.9 mm

Teknisk info

Produktinformasjon

321 Size A-1/2 NPT (10,0-14,3)
Produsent Hawke International


Tilbehør
Support
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.