Hawke 501/414 A (M) 1/2N- (FM) 1/2N BR

Exde (10,0mm-14,3mm) for Conduit

Varenr: 501/414-A1/2N-1/2NBR
Gland Size
A-1/2" NPT - 1/2N  (10,0-14,3)
A-1/2" NPT - 1/2N (10,0-14,3)
A-M20 (10,0-14,3)
A-M20 (10,0-14,3)
B-M25 (13,0-20,2)
B-M25 (13,0-20,2)
C-M32 (19,0-26,5)
C-M32 (19,0-26,5)
O-M20 (6,5-11,9)
O-M20 (6,5-11,9)
OS-M20 (3,2-8,0)
OS-M20 (3,2-8,0)
E-M63 (42,5-56,3)
E-M63 (42,5-56,3)
BeskrivelseTeknisk infoSupport
Beskrivelse

Features

Provides a cable retention seal onto the cables outer sheath.
When used in increased safety applications, this cable gland may be used with braided cable where the braid and the cables outer sheath pass into the enclosure. The braid must be suitably terminated into the enclosure.
Provides female running coupler for cable gland or conduit entry.

Materials & Finishes

The 501/414 cable gland is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard.

Technical Data

  1. Exd IIC Gb, Exe IIC Gb, Extb IIIC Db
  2. Certificate No's
    Baseefa06ATEX0056X and IECEx BAS 06.0013X.
  3. Suitable for use in:
    Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC.
  4. Construction and Test Standards:
    IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7 and IEC/EN 60079-31.
  5. Ingress Protection:
    IP66, IP67 and 
    IP 68  (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X.
  6. Deluge Protection to:
    DTS01
  7. Operating Temperature Range:
    -60°C to +100°C
  8. Assembly Instruction Sheet:
    AI 310.

 

 

CABLE GLAND SELECTION TABLE
Size
Ref.
Entry Thread
Size
Cable Acceptance Details ‘G’
Compressed
Length
Hexagon
Dimensions
Male Female
Metric NPT* Metric NPT* Outer Sheat'B' Across
Flats
Across
Corners
Standard Option Standard Option Standard Seal Alternative Seal (S)
Min. Max. Min. Max.
Os M20² ½" - M20 - - 3.2 8.0 - - 54.5 24.0 26.5
O M20² ½" - M20 - - 6.5 11.9 - - 54.5 24.0 26.5
A M20 ¾" ½" M20 - - 10.0 14.3 9.0 13.4 56.4 30.0 32.5
B M25 1" ¾" M25 - - 13.0 20.2 9.5 15.4 48.2 36.0 39.5
C M32 1¼" 1" M32 - - 19.0 26.5 15.5 21.2 61.6 46.0 50.5
C2 M40 1½" 1¼" M40 - - 25.0 32.5 22.0 28.0 64.6 55.0 60.6
D M50 2" 1½" M50 - - 31.5 44.4/42.3¹ 27.5 34.8 83.2 65.0 70.8
E M63 2½" 2" M63 - - 42.5 56.3/54.3¹ 39.0 46.5 83.2 80.0 88.0
F M75 3" 2½" M75 - - 54.5 68.2/65.3¹ 49.5 58.3 86.4 95.0 104.0
'T' — All dimensions in millimetres (except * where dimensions are in inches). Metric entry threads are 1.5mm pitch as standard.
¹ Smaller value is applicable when selecting reduced NPT male entry option.
² Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable inner sheath diameter is 10.9mm
# NPT female thread sizes equivalent to those shown in the table for the male thread size are available. Hexagon dimensions as shown may alter.

Teknisk info

Produktinformasjon

Produsent Hawke International


Support
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.