20923

Chalmit Protecta III Fluorecent 2x36W

PRGE/236/BI/M25

Varenr: PRGE/236/BI-2
Alt. varenr: 3348948
BeskrivelseTeknisk infoTilbehørSupport
Beskrivelse
Protecta III (PRGE - Standard)

by Chalmit Lighting

The Protecta III is a proven and reliable T8 fluorescent luminaire. The Protecta’s rugged, corrosion resistant construction (IP66/IP67) combined with an advanced high frequency ballast ensure minimum product maintenance is required. When access is required the Protecta III features an easy access clamp bar and automatic lamp de-energisation.

  • Simple rugged construction.
  • Advanced control gear gives 50/60Hz operation, high power correction factor and regulated lamp output that is 20% greater at -20°C than competitors.
  • Resistant to voltage fluctuations.
  • dc operation.
  • Quick release mains terminals.
  • DTS-01 deluge tested.
  • Vibration tested to comply with Lloyds/DNV.
  • End of life (EOL) protection to IEC 60079-7.

The Protecta III hazardous area Ex e fluorescent luminaire is designed for use in Zone 1 areas. Click the ‘request a quote’ button to speak to one of our Specialists about how the Protecta III range could work for you.

 

 

Type of protection

Ex e mb q (Increased safety Encapsulation Powder filling)

ATEX Classification

Group II Category 2 GD

Area Classification

Zone 1 and 21 areas to EN 60079-10-1 and EN 60079-10-2 with installation to EN 60079-14

Certificate

EC Type Examination Certificate Baseefa04ATEX0220

Coding

EX II 2 GD Ex e mb q IIC T4 Tamb 55°C

Enclosure

GRP body with polycarbonate cover and brass suspension points

Reflector/Geartray

White polyester painted zinc coated steel

Entry

4 x M20 cable entries, 2 at each end

Termination

Quick release mains terminals - 4 core 4mm² max. conductor with looping and 16A rating through wiring. (6mm² terminations available - /SC option)

Installation

Two M8 tapped brass inserts located on rear of body

Control Gear

High Frequency

Relamping

Quick release diffuser clamp and hinged cover

Lampholder

G13 (Bi-pin)

Burning Position

Universal

Ingress Protection

IP66/67 to EN 60529

Electrical Supply

220V - 254V 50/60Hz




Std. Cat No.

Wattage

Lamp

TClass

T°C (Dust)

Ambient °C

Weight

PRGE/218/BI

2x18W

T8

T4

85

-20 to +55

7.4kg

PRGE/236/BI

2x36W

T8

T4

85

-20 to +55

10.9kg

PRGE/218/MO

2x18W

T8

T4

85

-20 to +55

7.4kg

PRGE/236/MO

2x36W

T8

T4

85

-20 to +55

10.9kg

MO – Mono-pin (fa6 Cap) Lamps. Mono-pin Coding: Ex d e q.

 




Options – Suffix to catalogue No.

/120

Specific voltage (110/130)

/M25

M25 cable entries

/SC

Screwed connection terminal block (up to 6mm² conductors)

/SB

Stainless steel mounting bush

/3P

3 phase termination facility (Not available if looping required)

/LBE

Looping both ends

/EL

Extra live termination facility (to match emergency circuit)

/SE

Spigot entry

 

Teknisk info

Produktinformasjon

Produsent Chalmit


Tilbehør
Support
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.